- Piping systems up to 30" (on larger piping systems upon request)
- Pressures to the rating of the pipe
- Carbon steel, stainless steel, alloys or cast iron
- Piping containing water, hydrocarbons or any chemical with a suitable freeze point and no flow
|
 |
Why use a Freeze Stop? |
- Clean, quick, simple, and economical
- No permanent modification to your piping system
- No mechanical work or welding to the piping system
- Branch connections can be easily shut off without putting the main line out of service
- No risk of dripping liquid during welding operations once the piece downstream of the plug is dried
- Eliminates bulk transfer and storage of toxic or corrosive liquids since only a very small amount of liquid needs collecting when a pipe is opened after it’s plugged cryogenically
- Minimizes the amount of expensive liquids lost (thus saving you money)
- Does not permanently alter the metallurgy of your pipes
|
Typical Freeze-Stop Applications |
- Alcohols
- Animal Oil/Fats
- Beer
- Brines
- Calcium Chloride
- Chromic Acid
- Crude Oils
- Contaminated Water
- Deionized Water
- Detergents
- Distilled Water
- Effluents
- Fuel Oils
- Fruit Juices
- Glycols
- Hydrochloric Acid
- Lubrication Oils
|
- Methylene Chloride
- Milk
- Mineral Oils
- Molasses
- Paints
- Potassium Carbonate
- Refrigerants
- Seawater
- Sewage
- Sludges
- Slurries
- Sulfric Acid
- Titanium Chloride
- Transformer Oils
- Vegetable Oils
- Vinegar
- Water
|
