- Two SealTite® fittings welded to the line
- Temporary valves installed and two line stop taps completed
- The two line stops are set and the pressure vented
- The work between the two line stops is completed
- The line stops are equalized and removed
- Team’s SealTite® completion plugs are set and the temporary valves removed
|
- Two SealTite® fittings welded to the line.
- Temporary valves installed and two line stops taps completed.
- The two line stops are set and the pressure vented downstream of both line stops
- The primary line stop holds the pressure while the secondary line stop ensures a 100% safe seal.
- The work downstream is completed.
- The line stops are equalized and removed.
- Team’s SealTite® completion plugs are set and the temporary valves removed.
|
- Four SealTite® Fittings welded or bolted to the line
- Temporary valves installed to the fittings and Line Stop taps completed
- The bypass installed and the temporary bypass valve opened
- Line Stop machines installed to the SealTite fittings and lowered to the set position
- Piping between the two Line Stops is de-pressurized and repaired
- The repaired section is equalized and the Line Stops removed
- Temporary bypass removed and SealTite completion plugs installed in the four fittings
- Equipment is removed and blind flanges installed to complete the project
|
