|
Team Industrial Services can provide
you day-to-day testing and inspection on a permanent or call-out basis. In
addition, the company is known for its expertise and capability to mobilize
large groups of personnel and equipment to meet the needs of any major
turnaround, shutdown or outage – planned or unplanned.
History
|
 |
Began operations as Magnaflux - 1940 |
|
Technician performing ultrasonic
inspection of a shaft. This method
detects sub-surface cracks and other defects. |
| |
Purchased by General Mills - 1958 |
| |
Purchased by Champion Spark Plugs - 1964 |
| |
Acquired by Peabody Testing - 1973 |
| |
Acquired by CBI - March 1992 |
| |
Acquired by Praxair - January 1996 |
| |
CBI acquired by IISI - June 1997 |
| |
MQS acquired by IISI - June 1997 |
| |
IISI acquired by Team, Inc. - August 2004 |
The largest NDT and inspection company in the U.S.
|
| |
Team Industrial Services is the largest NDT inspection company in the U.S. |
| |
– Operates world-class testing labs |
| |
– Can provide sample or full run component tests |
| |
-
Simple or complex
- Composites as well as alloys
|
| |
– Tests conducted to strict industry, corporate standards/specifications |
Range of inspection services
|
| |
More than 1,000 trained craftsmen |
Ultrasonic Tank Crawler |
| |
Digital and film radiography utilizing X-ray and gamma sources |
| |
A-Scan, B-Scan, and C-Scan ultrasonic inspection> |
| |
Immersion ultrasonics |
| |
Alternating current field measurement (ACFM) |
| |
Data management software |
| |
Long-range guided-wave ultrasonics (GUL Wavemaker® and Teletest) |
| |
Mechanical integrity, process safety management (PSM), and corrosion monitoring |
| |
Visual inspection including API 510, API 570 and CWI services |
| |
Tank Inspection (API 653) |
| |
Eddy-current/electromagnetic (RFT,IRIS) examination for tube and
surface applications |
| |
Boiler mapping program for tube erosion/corrosion analysis |
| |
Positive material identification (PMI) |
| |
Dye penetrant testing |
| |
Pipeline location and coating assessment |
| |
Magnetic Particle examination (dry, wet fluorescent) |
| |
Destructive testing |
| |
Metallurgical/replication |
| |
Metallurgical and chemical analysis |
| |
Ground-penetrating radar (GPR) |
| |
| Additionally, Team Industrial Services inspection services provide
customers with the largest and safest fleet of mobile darkrooms with
radiographic sources in North America |
State-of-the-art digital radiography services
|
| |
No film developing required |
ACFM inspection for crack detection and corrosion |
| |
No chemicals to buy, process, or dispose |
| |
Reusable plates can be scanned in less than a minute |
| |
– Lowers your cost per exposure |
| |
– Provides a wider exposure tolerance |
| |
– Thicker/thinner sections can be displayed on the same exposed image |
| |
-
Over or under film exposures are eliminated
- Low curie sources are used
- Very
small exclusion zones are needed
- Exposure times are shorter
- Productivity in
increased (less interference with onsite workers)
|
| |
Selenium 75 is utilized |
| |
– Provides a much safer working environment |
| |
– Provides greater sensitivity |
| |
Digital images can be enhanced to provide clarity |
| |
– Tags can be placed on the image labeling/describing indications |
| |
Precise measurements of cross sections and between two points can
be captured and displayed on the image |
| |
Digital images are stored on computer disk media and can be emailed |
| |
– Data and images are electronically archived |
| |
– Retrieval costs of film are eliminated |
| |
– Only the original scanned image can be saved without
modifications, thus maintaining integrity |
| |
Kodak's system/VMI Starr View Digital Radiology Software is
utilized |
|
